We experimentally demonstrate a cost-effective coherent 10 Gb/s system for passive optical networks, exploiting off-the-shelf DFB lasers and a phase-diversity receiver based on a simple 3 & times; 3 fiber coupler. Since the system uses a simple amplitude-shift keying format, no complex electronic processing is required and there is no need of frequency/phase stabilization of the local oscillator, whose frequency can change by more than & plusmn;1 GHz with no significant performance variation. The system has a 40 dB loss budget and is, therefore, compatible with the high losses of practical optical distribution networks, where power splitting is used to distribute the signal to a high number of users. Error-free 10-Gb/s transmission at the FEC limit is obtained after transmission over up to 66 km of G.652 single mode fiber. Polarization-independent operation is also demonstrated with a simple modification of the detection scheme, without duplicating components, and with a small variation of the sensitivity. The limited complexity indicates the potential for a cost-effective implementation, which makes it compatible with the strictly cost-Aware access networks environment, even for high-end services.

Coherent Systems for Low-Cost 10 Gb/s Optical Access Networks

ARTIGLIA, MASSIMO ENRICO GIUSEPPE;CORSINI, Raffaele;PRESI, Marco;BOTTONI, Fabio;COSSU, GIULIO;CIARAMELLA, ERNESTO
2015-01-01

Abstract

We experimentally demonstrate a cost-effective coherent 10 Gb/s system for passive optical networks, exploiting off-the-shelf DFB lasers and a phase-diversity receiver based on a simple 3 & times; 3 fiber coupler. Since the system uses a simple amplitude-shift keying format, no complex electronic processing is required and there is no need of frequency/phase stabilization of the local oscillator, whose frequency can change by more than & plusmn;1 GHz with no significant performance variation. The system has a 40 dB loss budget and is, therefore, compatible with the high losses of practical optical distribution networks, where power splitting is used to distribute the signal to a high number of users. Error-free 10-Gb/s transmission at the FEC limit is obtained after transmission over up to 66 km of G.652 single mode fiber. Polarization-independent operation is also demonstrated with a simple modification of the detection scheme, without duplicating components, and with a small variation of the sensitivity. The limited complexity indicates the potential for a cost-effective implementation, which makes it compatible with the strictly cost-Aware access networks environment, even for high-end services.
2015
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11382/503541
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 22
social impact