Ring resonators are one of the fundamental building blocks of advanced integrated optical circuits. They find applications as nonlinear optical elements, filters, sensors, and switches among others. Here, a comprehensive optimization framework and experimental results of thermally tunable microring resonators in silicon photonics is presented, with a focus on standard silicon photonic foundry processes. In order to minimize the total power consumption, the ring resonators are tuned by applying a pulse-width-modulated electrical signal to the heaters. The thermal performance of integrated silicon and metal heaters are investigated and compared using an effective model validated by the measurement results. The heater power consumption is minimized by optimizing heater cross section, resistance, and metal contact configurations. Using the multiproject wafer run developed at CEA-LETI, it is demonstrated that a metal heater provides 30% lower power consumption compared to an integrated silicon one, reaching a power consumption of 27.53 mW per free spectral range. The measurements are in excellent agreement with the theoretically predicted thermal performance, with a deviation as low as 5%. The proposed framework, supported by the experimental results, will serve as a design guideline set that can be easily adapted for other thermo-optic switches in future silicon photonic applications.

PWM-Driven Thermally Tunable Silicon Microring Resonators: Design, Fabrication, and Characterization

Pintus P.;Oton C. J.
2019-01-01

Abstract

Ring resonators are one of the fundamental building blocks of advanced integrated optical circuits. They find applications as nonlinear optical elements, filters, sensors, and switches among others. Here, a comprehensive optimization framework and experimental results of thermally tunable microring resonators in silicon photonics is presented, with a focus on standard silicon photonic foundry processes. In order to minimize the total power consumption, the ring resonators are tuned by applying a pulse-width-modulated electrical signal to the heaters. The thermal performance of integrated silicon and metal heaters are investigated and compared using an effective model validated by the measurement results. The heater power consumption is minimized by optimizing heater cross section, resistance, and metal contact configurations. Using the multiproject wafer run developed at CEA-LETI, it is demonstrated that a metal heater provides 30% lower power consumption compared to an integrated silicon one, reaching a power consumption of 27.53 mW per free spectral range. The measurements are in excellent agreement with the theoretically predicted thermal performance, with a deviation as low as 5%. The proposed framework, supported by the experimental results, will serve as a design guideline set that can be easily adapted for other thermo-optic switches in future silicon photonic applications.
2019
File in questo prodotto:
File Dimensione Formato  
LPR19_Pintus_PWM-driven ring resonator switches.pdf

solo utenti autorizzati

Tipologia: Documento in Post-print/Accepted manuscript
Licenza: Non pubblico
Dimensione 4.17 MB
Formato Adobe PDF
4.17 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11382/531396
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 46
social impact