This paper investigates a new kind of device for producing electricity from the mechanical energy carried by ocean waves. The proposed machine, named poly-surge, is based on an existing sea-bottom hinged surging-flap concept that is equipped with a new power take-off (PTO) system based on a novel soft dielectric elastomer (DE) transducer. DEs are highly deformable polymeric materials that can be used to conceive electrostatic generators relying on capacitance variation. This kind of generators shows a number of features that well match the requirements of a wave energy converter since they are light-weight, low-cost, tolerant to salty/aggressive marine environment, noise-free during operation, and easy to manufacture and install. The considered poly-surge converter employs a parallelogram-shaped DE generator (PS-DEG) arranged in a dual agonist–antagonist configuration, which makes it possible to provide the flap with controllable bidirectional torques. In this paper, first a complete wave-to-wire multiphysics model of the overall system is described that assumes a simplified hydrodynamic response for the hinged-flap and an electro-hyperelastic behaviour of the PS-DEG. Second, a procedure is presented for the dimensioning and optimization of the PS-DEG for given sets of poly-surge flap dimensions, wave-climate information and constraints on both design and operational variables. Finally, simulation results are provided to demonstrate that the poly-surge can achieve quasi-optimal power production with a properly designed agonist–antagonist DEG PTO system.

Model-based design and optimization of a dielectric elastomer power take-off for oscillating wave surge energy converters

Moretti, Giacomo;FONTANA, Marco;VERTECHY, ROCCO
2015-01-01

Abstract

This paper investigates a new kind of device for producing electricity from the mechanical energy carried by ocean waves. The proposed machine, named poly-surge, is based on an existing sea-bottom hinged surging-flap concept that is equipped with a new power take-off (PTO) system based on a novel soft dielectric elastomer (DE) transducer. DEs are highly deformable polymeric materials that can be used to conceive electrostatic generators relying on capacitance variation. This kind of generators shows a number of features that well match the requirements of a wave energy converter since they are light-weight, low-cost, tolerant to salty/aggressive marine environment, noise-free during operation, and easy to manufacture and install. The considered poly-surge converter employs a parallelogram-shaped DE generator (PS-DEG) arranged in a dual agonist–antagonist configuration, which makes it possible to provide the flap with controllable bidirectional torques. In this paper, first a complete wave-to-wire multiphysics model of the overall system is described that assumes a simplified hydrodynamic response for the hinged-flap and an electro-hyperelastic behaviour of the PS-DEG. Second, a procedure is presented for the dimensioning and optimization of the PS-DEG for given sets of poly-surge flap dimensions, wave-climate information and constraints on both design and operational variables. Finally, simulation results are provided to demonstrate that the poly-surge can achieve quasi-optimal power production with a properly designed agonist–antagonist DEG PTO system.
2015
File in questo prodotto:
File Dimensione Formato  
Poly_Surge_article_revised_II_submission.pdf

accesso aperto

Descrizione: Articolo principale
Tipologia: Documento in Post-print/Accepted manuscript
Licenza: Licenza non conosciuta
Dimensione 4.55 MB
Formato Adobe PDF
4.55 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11382/503317
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 24
social impact