Exoskeletons targeting the upper limb have been broadly developed both for rehabilitation and to augment user's physical performance. Generally, they are rigid robotic interfaces characterized by a non negligible mechanical impedance at the end effector and consequently perceived by the upper limbs as an external body. The rigid frame, moreover, adds kinematic constrains to the natural joint kinematics which may result in discomfort and ultimately in pain. The concept of soft wearable exoskeleton (or exosuit) has been developed and tested for the lower limb and the hand to address such issues thanks to their minimal inertial contribution and influence on the natural kinematics. In the current paper the design of an soft robotic interface for the elbow joint is presented, whose aim is to provide assistance torque to the targeted joint to facilitate the execution of the activities of daily living. Differently from the state-of-The-Art design solutions, our system is able to drive both flexion and extension of the same joint with a single motor in an agonist-Antagonist fashion, making the actuation stage compact and energy efficient. A clutching mechanism is also included in the design in order to save power during static configuration, preventing the motor to hold the joint position for a large amount of time. An exosuit has been designed to transfer the torque of the actuator to the biomechanical joint by means of Bowden cables. Two series elastic elements are employed to overcome the drawbacks of the agonist-Antagonist mechanism and to provide additional compliance at the end effector. A preliminary test has been finally performed in order to characterize the actuation.

Design and preliminary characterization of a soft wearable exoskeleton for upper limb

Cappello L.;
2016-01-01

Abstract

Exoskeletons targeting the upper limb have been broadly developed both for rehabilitation and to augment user's physical performance. Generally, they are rigid robotic interfaces characterized by a non negligible mechanical impedance at the end effector and consequently perceived by the upper limbs as an external body. The rigid frame, moreover, adds kinematic constrains to the natural joint kinematics which may result in discomfort and ultimately in pain. The concept of soft wearable exoskeleton (or exosuit) has been developed and tested for the lower limb and the hand to address such issues thanks to their minimal inertial contribution and influence on the natural kinematics. In the current paper the design of an soft robotic interface for the elbow joint is presented, whose aim is to provide assistance torque to the targeted joint to facilitate the execution of the activities of daily living. Differently from the state-of-The-Art design solutions, our system is able to drive both flexion and extension of the same joint with a single motor in an agonist-Antagonist fashion, making the actuation stage compact and energy efficient. A clutching mechanism is also included in the design in order to save power during static configuration, preventing the motor to hold the joint position for a large amount of time. An exosuit has been designed to transfer the torque of the actuator to the biomechanical joint by means of Bowden cables. Two series elastic elements are employed to overcome the drawbacks of the agonist-Antagonist mechanism and to provide additional compliance at the end effector. A preliminary test has been finally performed in order to characterize the actuation.
2016
978-1-5090-3287-7
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11382/532184
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 51
social impact